Glen Dale Roofing Services
Glen Dale Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in Glen Dale.
Roof Replacement
We replace roofs. It's what we do more than anything else. Our Glen Dale crews average 15-20 complete tear-off and replacements per month. That kind of volume means we've seen every situation: steep pitches, multiple layers, rotted decking, improper ventilation from the last guy. We fix all of it and install a roof system that's warranted for decades.
Get a Free Quote →
Roof Repair
Our roof repair process: inspect the issue, identify the root cause, quote the fix, do the work, warranty the repair. Simple. If the root cause is widespread (poor ventilation causes ice dams, for example), we'll recommend addressing that too. But the choice is always yours.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
We install new roofs on new homes, additions, detached garages, carports, and covered patios. Material options include asphalt architectural shingles, metal standing seam, metal corrugated, and flat membrane systems. We help you choose based on your budget, aesthetic preference, and the specific demands of your Glen Dale climate.
Get a Free Quote →
Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Glen Dale home.
Get a Free Quote →
Shingle Roofing
CertainTeed Landmark PRO with NailTrak technology and Max Def color blends. Dimensional color depth that mimics natural cedar. Algae-resistant with StreakFighter technology. Class A fire rating, ASTM D3462 compliant, rated to 110 mph per ASTM D3161 Class F (Landmark PRO IR rated to 130 mph). 5-Star SureStart Plus warranty when installed by CertainTeed SELECT ShingleMaster. That's us. The warranty covers 100% of material and labor costs for 20 years with declining coverage for 30 more.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Glen Dale. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →
Commercial Roofing
Commercial roofing in Glen Dale means flat and low-slope systems: TPO, EPDM, PVC, modified bitumen, and built-up roofing. We install and repair all of them. Retail, warehouse, office, restaurant, multi-family. Our commercial crew handles buildings from 2,000 to 100,000 square feet.
Get a Free Quote →
Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →
Roof Inspection
We don't inspect roofs from the ground with binoculars. We get on the roof. Every inspection includes a full walkthrough: shingle condition, flashing integrity, pipe boots, ridge vent, soffit ventilation, gutter function, and visible attic moisture signs. You get photos and a written report.
Get a Free Quote →
Emergency Roof Repair
Our trucks carry 20x30 reinforced tarps, 2x4 lumber, plywood sheets, pipe boots, ridge cap shingles, flashing stock, roofing cement, and neoprene screws. We show up ready to secure your roof, not ready to schedule a follow-up appointment.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →